GSK980TDb is a new product based on GSK980TDa, and its software and hardware are upgraded, which controls 5 feeding axes (including C axis), 2 analog spindles, 2ms interpolation in high speed, 0.1 μm control precision, which obviously improve the efficiency, precision and surface quality of parts processing. New USB interface, it supports the file operation and program running in flash disk. As the upgraded product of GSK980TDa, GSK980TDb is the best choice of CNC lathe for the technical upgrading in economical type.

n        Five axes of X, Z, Y, 4^th and 5^th control, the axial name and type of Y, 4^th and 5^th can be defined.

n        2ms interpolation cycle, precision of 1μm or 0.1μm can be selected.

n        Maximum speed 60m/min (When it is 0.1μm, the maximum speed is 24m/min).

n        Adapted servo spindle can realize spindle continuous position, rigid tapping, rigid screw processing

n        Built-in many PLC programs, the current running PLC program can be selected

n        G71 command supports the cycle cutting of groove shape outline

n        Support the programming of macro command in sentence type and the calling of macro program with parameter.

n        Support programming in metric system/inch system, with function of auto tool-setting, auto chamfering, tool life management.

n        Display in Chinese, English, Spanish or Russian, which is selected by parameter.

n        With USB interface, it supports file operation in flash disk, system configuration and software upgrade.

n        Analog voltage output of 0V～10V in two channels, support double spindles

n        Electrical MPG input in one channel, it supports hand electrical MPG.

n        Common input in 40 points/common output in 32 points

n        Overall installation dimension and the command system are completely compatible with GSK980TDa. 

n       Number of control axes

u       Number of control axes: five axes (X, Z, Y, 4^th and 5^th ）

u       Number of linkage axes: three axes

u       Number of PLC control axes: four axes

n        Feeding axes function

u       Minimum command unit: 0.001mm or 0.0001mm is selectable

u       Position command range: ±99999999 × minimum command unit

u       24m/min Rapid traverse speed: When the command unit is 0.001mm, the maximum speed is 60m/min; 0.0001mm, the maximum speed is 24m/min.

u       Rapid override: Total four levels: F0, 25%, 50% and 100%, real-time adjusting

u       Feeding override: Total 16 levels: 0～150%, real-time adjusting

u       Interpolation mode: Interpolation of linear, arc (support arc interpolation of three points), thread, ellipse and parabola and rigid tapping.

u       Auto chamfering

n        Thread

u       Common thread (follow the spindle)/rigid thread

u       Single-headed/multiple thread of straight, taper and terminal surface in metric system/inch system, equal and variable pitch thread

u       Thread retraction length, angle and speed characteristics can be set

u       Thread pitch: 0.01mm～500mm or 0.06 tooth/inch～25,400 tooth/inch

n        Acceleration and deceleration function

u       Cutting feeding: Linear type or index type is selectable.

u       Rapid traverse: Linear type or S type

u       Thread cutting: Linear type or index type is selectable.

u       The starting speed, finishing speed and time of acceleration and deceleration are set by the parameter.

n        Spindle function

u       Analog voltage 0V～10V output in two channels, support two-spindle control.

u       Spindle encoder feedback in one channel, the resolution of spindle encoder can be set（100p/r～5000p/r）.

u       The transmission ratio between encoder and spindle is: （1～255）:（1～255）

u       Spindle speed: It is set by S code or PLC signal, the speed range is 0rpm～9999rpm.

u       Spindle override: Total 8 levels: 50%～120%, real-time adjusting

u       Spindle constant surface speed control 

u       Rigid tapping

n        Tool function

u       Tool length compensation

u       Tool nose radius compensation (C type)

u       Tool wearing compensation

u       Tool life management

u       Method of setting tools: Tool-setting in fixed position, trial cutting tool-setting, return to reference point, auto tool-setting

u       Tool offset executing mode: Rewriting coordinate mode, tool traverse mode

n        Precision compensation

u       Backlash compensation

u       Pitch error compensation in memory type

n        PLC function

u       PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1^st level program: 8ms

u       PLC program communication download

u       Support PLC warning and PLC alarm

u       Support many PLC programs (maximum 16), the current running PLC program can be selected

u       Basic I/O: input in 40 points/output in 32 points

n         Man-machine interface

u       7.4″large screen LCD, the resolution is 234×480

u       Display in Chinese, English, Spanish or Russian, etc

u       Display in two-dimensional tool path

u       Real-time clock

n        Operation management

u       Operation mode: Edit, auto, MDI, mechanical zero return, MPG/single step, manual, program zero-return

u       Operation authority of multiple-level management

u       Alarm record

n        Editing program

u       Program capacity: 25M, 10,000 programs (including subprograms, macro programs)

u       Editing function: program/block/characters research, rewriting and deleting

u       Program format: ISO code, support macro command programming in sentence type, programming of relative coordinate, absolute coordinate and hybrid coordinate.  

u       Calling program: Support macro program with parameter, subprogram nesting of 4 layers.

u      Community function

u       RS232: Files of part program and parameter, etc can be transmitted in two-way, support PLC program, serial ports of software upgrade.

u       USB： File operation and file directly processing in flash disk, support PLC programs, flash disk of software upgrade.

n        Safety function

u       Emergency stop

u       Hardware travel limit

u       Software travel limit

u       Data restoring and recovering

GSK980TDb adopts the same configuration software GSKCC and communication software TDComm，GSKCC and TDComm, which are run in WIN98/2000/XP, with GSK980TDa. The machine manufacturer can edit ladder diagram, part program, parameter, thread error compensation data, tool compensation data in PC and upload and download the file and data between PC and CNC in GSKCC. The end users can transmit the part program, parameter, thread error compensation data, tool compensation data between PC and CNC in two-way in TDComm.